Highly durable. Our wobblers are
printed on 400gsm board and gloss laminated to give sturdiness and the
most vibrant colours possible. We have a range of standard sizes but we
can cut them to any size you require at no extra charge (minimum size 40 x 40mm).
Supplied with acetate struts. Wobblers are supplied with
clear plastic struts (shown in the photograph above) or you can choose spring
twisters or metal strips at extra cost.
Sizes other than standard sizes. We price our wobblers
according to six standard sizes, but we will cut them to specific-sized rectangles
free of charge. Simply price as the next size up – for example, if you need
a 60 x 75mm wobbler, please refer to the 75 x 75mm table.
Custom
shaped wobblers. If you need a custom shaped shelf-edge wobbler,
the following extra charges apply:
On your first order we manufacture a cutting forme for a
one-off cost starting at just £60.00. This charge only applies to
your first order as we keep your forme for future orders.
Each order is subject to a setup charge of £45.00. This covers
the work of loading the forme onto our die-cutting equipment and checking
its registration (alignment) is correct.
Lastly, a running cost of £30.00 per 1,000 wobblers applies.
This
combination of charges means larger orders of custom-shaped wobblers are
much more cost-effective than smaller quantities. Please feel free to contact us on 01457 778788 to explore the cost of ordering
different quantities.
Alternative fixings
Our wobblers are supplied with loose 150mm acetate strips as standard. We
can supply alternative fixings as shown below.
We can also supply wobblers with the fixings ready-attached at extra cost.
Please note this will extend the turnaround time considerably as the fixings
are attached by hand. Please contact
us if you are interested in knowing
more about this service.
For a metal strip fixing
please add 3.5p per wobbler
For a spring fixing
please add 8p per wobbler
Turnaround time
Quantities of shelf-edge wobblers up to 30,000 are despatched within
7 days. For larger quantities, please contact
us for a delivery estimate.
VAT guidance
Shelf-edge POS wobblers are standard rated
for VAT.
Please note: we only deliver samples to the
United Kingdom. | Nous
livrons seulement des échantillons
au Royaume-Uni. | Sólo entregar las muestras al Reino Unido. | Wir liefern
nur Proben auf das Vereinigte Königreich. | Abbiamo solo consegnare campioni
al Regno Unito. | My pouze dodat vzorky na Spojené Království.
| My tylko dostarczamy próbki do Zjednoczonego Królestwa.| Vi kan
bara leverera prover till Storbritannien. | Πρέπει μόνο να παράσχει δείγματα στο –νωμένο Βασίλειο.
| Мы только доставить образцы в Соединенное Королевство.
Design template
Right-click the link below and select 'Save
Target As' or 'Save As' to download the template to your computer. All of
our templates are in PDF format, so you will need suitable software to import
and use them.
All of our paper is produced from sustainable sources. Our Environmental
Statement explains more about the steps we're taking to
minimise our impact on the environment.
Custom
shaped wobblers. If you need a custom shaped shelf-edge wobbler,
the following extra charges apply:
Right-click the link below and select 'Save
Target As' or 'Save As' to download the template to your computer. All of
our templates are in PDF format, so you will need suitable software to import
and use them.
